Motion Recording is an alternative recording method to Schedule recording. Selected boxes are marked light blue, which indicates that the DVR will only be recording if motion is detected during the times indicated. Recordings scheduled in the “Schedule” tab will supersede “Motion” recordings, though you will still receive Motion events in the Event > Search menu.

1. Channel List: Select the channel you wish you schedule from the drop down list.
2. Scheduling Grid: Each box on the grid represents one hour, from left to right, starting at 12AM – 1AM, and ending at 11PM-12AM. Double click on a one hour block to set the schedule for that day. Light blue boxes, as pictured, indicate that the DVR will be recording during that time.
3. Copy Button: Copy the settings for one channel to other channels. Select the channels you will copy the settings to by using the “Apply Settings To:” drop down menu. Once you select the channel you will copy the settings to, select the “Copy” button.
4. Quick Add/Quick Remove:  Located in the top right corner, these buttons are used to quickly add or remove one hour boxes from the Scheduling Box.

Set a Schedule Menu

Use this menu to set a more precise schedule than what the Quick Add and Quick Remove tools can offer. Access this menu by double clicking anywhere in the Scheduling Grid.

1. To set your schedule, select the day of the week you want to schedule from the drop down menu.
2. Select Add to create a new schedule.
3. Select Delete to delete an existing schedule.
4. Using the drop down menu select your Start Time and End Time.
5. Confirm your selection by clicking the check mark.

To copy the settings for one channel to other channels:

6. Select the channels you will copy the settings to by using the “Apply Settings To” drop down menu.
7. Select the Copy button.