Applied: ZSWNVK-J820XX and ZSWNVK-J830XX Wireless NVR system.
1 You can find your NVR's model number on the label at the bottom of your NVR.
2 If your NVR's label is lost, please go to NVR's Main Menu - Information - System to take a photo to us, we will send the correct upgrade file to you.
How to upgrade the system?
Step 1 You needn't open the upgrade file, please scroll down directly to the bottom of this article and download the attached upgrade file rootfs-3536dv100.
(Please save the upgrade file rootfs-3536dv100 in the root directory, not save it under any other folders.)
Note: to perform this process, you will want to use a USB 2.0 drive ideally 16 GB or less in size, formatted in FAT32.
Some customers have reported issues when downloading this file using the "Microsoft Edge" browser.
If the file was downloaded using the Microsoft Edge browser, this will cause the file to be converted to a text file, which can't be read by the NVR. We recommend using a different browser for this process.
Step 2 The file name must remain exactly as listed in the article for the DVR to recognize it as an update. It should be rootfs-3536dv100, if the file name is changed to rootfs-3536dv100(1), the upgrade will be failed.
Step 3 Before starting to upgrade, please unplug the power supply and mouse, then plug the U-disk and re-plug the power supply.
Step 4 Two upgrades are required, and each upgrade will take 2-3 minutes. When the first upgrade starts, the TV monitor will display "Upgrading". After the first upgrade is completed, the NVR system will restart itself, and the second restart will continue Upgrade, please wait patiently for 2-3 minutes, after the second upgrade is successful, the NVR system will restart again, and then you can unplug the U-disk.
It can upgrade automatically as long as it has electricity, the upgrade process need to last 5-6 minutes, please be patient.
You can go to NVR's Main Menu > Information > System to check the firmware version of the system, if it is V1.7.4, the upgrade was successful.
After the upgrade is complete, you can follow the steps below to reset and add cameras:
What if it doesn't work?
Dont be worry.
If the upgrade is successful, please go to the NVR’s Main Menu > Information > System to check if the firmware version and Launch date have changed.
If the upgrade is failed, we suggest you change another U-disk or USB port to try.
Please let us know if you have any questions:
Support Email address: firstname.lastname@example.org
Our Facebook: https://www.facebook.com/ZosiTechnology/