Hi, y’all,

The v1.7.1 update for the ZR08LL All-in-one Wireless NVR is now available and the new alert system you've been waiting for is here! In this new version, we have added the following features:

1. Daylight Saving Time Feature;

2. Human Detection Function;

3. Smart Light & Sound Alarm System;

4. HDMI can now play audio.

In addition, we have also replaced the hibuf part to further optimize the experience of using the system.

Models: ZR08LL All-in-one Wireless NVR

Download via https://supports.zositech.com/hc/en-us/articles/10958734633113-ZR08LL-All-in-One-Wireless-NVR-V1-7-1-Upgrade-File-rootfs-3536dv100-ZSWNVK-L820XX-ZSWNVK-L830XX- 

The following are the step-by-step instructions for upgrading the NVR specific operations:

To perform this process, you will want to use a USB 2.0 drive ideally 16 GB or less in size, formatted in FAT32.

After you have downloaded the update file from the link above, please note that this file should be placed in the root directory of the USB (not in any folders) and the file name must remain the same for the NVR to recognize it.
Some customers have reported issues when downloading this file using the "Microsoft Edge" browser. We recommend using a different browser for this process.

In case it helps, here is a link to a Youtube video demonstrating the process:

https://www.youtube.com/watch?v=RX-7kbgmYIg 

If you're unfamiliar with how to format a USB in FAT32, this video provides the steps:

https://www.youtube.com/watch?v=kMGS7DeG_HY 

If you're not seeing an "updating..." message on the screen for at least three minutes, the NVR isn't detecting the update file. There are a few reasons this could be: 

1) If the NVR has alternative places to look for the update, it won't run. The ethernet cable needs to be disconnected, as well as any other USB devices including the mouse. The power should be disconnected for at least 10 seconds before connecting the USB drive and reconnecting the power.

2) If the USB is 3.0, the NVR will not be able to read it. USB 3.0 was developed after the NVR motherboards. Likewise, the NVR is not in FAT32 format, it won't be read. The easy way to tell if a USB drive is 3.0 is the color of the board chip inside the USB connection. 2.0 always uses a black board, while 3.0 generally has a colored board, often red or blue. 

3) The file name must remain exactly as listed in the article for the NVR to recognize it as an update. If the file was downloaded twice, a PC will add (1) to the end of the name, which will create an issue. If the file was downloaded using the Microsoft Edge browser, this will cause the file to be converted to a text file, which can't be read by the NVR. 

4) The NVR cannot navigate through folders in the USB to find the update. The file must be placed in the USB root directory. 

Please let me know if you have any questions!

#Zosi-SecurityMakeEasy

Know more via Zosi Website: https://www.zositech.com/