Hi, y’all,

Are you struggling to connect your new wireless IP camera with a WiFi network despite it working perfectly fine when you plug it into the modem with the help of an Ethernet cable? Does your IP camera not keep a stable connection with the network?

If you said "yes!" to the questions above, then you are not alone! Many IP camera users have reported facing similar issues of their IP camera failing to connect to WiFi.

Fortunately, there are many ways to solve this issue with IP cameras!

This post will talk about everything you need to know about IP cameras and why they cannot connect to WiFi. Furthermore, we will also provide you with a list of ways you can fix this issue in a matter of minutes.

If you are curious to know more, please read this post till the end!

- Why a Wireless IP Camera cannot Connect to WiFi?

Here is a list of the main reasons why your WiFi security camera isn’t connecting to the internet or isn’t working on WiFi.

• WiFi coverage is not strong enough. The wireless IP camera may be too far away from the router or the access point.

• The wireless IP camera doesn’t have sufficient power and usually, the WiFi cameras tend to use more power than regular IP cameras.

• The antennas on the wireless IP camera are loose. Make sure they’re tight and pointed properly toward your router.

• Wrong WiFi password entered on the wireless IP camera.

• The wireless IP camera is not connected to your WiFi but to a different one.

• You set the wrong IP address on the wireless IP camera.

• Your router may be old and doesn’t support the camera’s WiFi channel.

• The firmware on the camera is old (you need to update it).

• Your internet is unstable and isn’t working properly.

• There’s a lot of interference that can cause drops in the WiFi signal.

• The P2P option on the wireless IP cameras is disabled (or it was never enabled in the first place).

• The router’s firewall isn’t allowing the wireless camera to connect.

- How to Fix a Wireless IP Camera Not Working or Connecting to the Internet?

If your stand-alone wireless IP camera or a wireless IP camera system is not connecting to the internet/WiFi or the IP camera goes offline or simply fails to connect, try these solutions to fix the connectivity issue:

1. Make Sure the Wireless IP Camera has Sufficient Power.

Please check if the wireless IP camera is getting powered. Inspect the power supply and make sure it’s working fine. Ensure that none of the cables is loose or wonky. Confirm that the power outlet is working properly.

If you’re using battery-powered WiFi cameras, check if the battery is charged. If not, replace the battery and try again. Usually, most wireless IP cameras come with status LED lights, to see if the power lights are on.

2. Make Sure the Password is Correct.

Many people type the wrong WiFi password on the IP camera and they wonder why it doesn’t connect. The connection may fail simply because you typed the wrong password. Make sure you’re using the right password.

Please type the password slowly and don’t add extra spaces. Also, please don’t forget the WiFi passwords are case sensitive. If you don’t know the password, access the router settings and you can see it over there.

3. Adjust the IP Camera Antennas.

Please check if the antennas on the camera are fixed well and they’re not loose, then point them to the area where your WiFi router is located.

When the camera is shipped, the antennas are not installed on the camera.

Once you deploy the wireless camera, please make sure the antennas are tightened properly.

4. Make Sure the WiFi Signal is Strong Enough.

If your WiFi coverage is weak, the wireless IP camera won’t be able to establish a stable connection with the WiFi. It may connect for a few minutes, then disconnect, and so on. Or in some cases, the IP camera is so far away from the router that it can’t even detect any WiFi signal.

Please check the distance between the wireless IP camera and the router and make sure the distance can be covered by your WiFi signal.

To get the right information, you may need to check the manufacturer’s specs and keep in mind that walls and other barriers can weaken the WiFi strength.

Additionally, you can log in directly to the IP camera and check how many bars are on the WiFi strength icon. 

If the WiFi signal is one or two bars, it means that your camera is too far away from the access point. In this case, bring the camera closer to the router and see if the wireless camera connects to the internet.

If it does, then you have a WiFi coverage issue.  Also, you can buy  a wifi booster or extender for the router to extend the signal of your WiFi (especially if you place the camera outdoors).

5. Avoid Interference by Changing the Frequency Band of your Router.

If you have many devices connected to your router, the whole network may become slow and congested. In that case, many devices on the network will struggle to stay online, for example, the wireless IP camera may go randomly on and off.

Especially, routers set to the 2.4GHz frequency band are more prone to experience congested and interference issues.

The 2.4GHz frequency is used by other routers around your home, and by other devices in the house such as phones, tablets, laptops, or even microwaves. All these devices may cause signal interference.

So, if your wireless camera is struggling to stay online on the 2.4GHz frequency band, simply reduce the online devices at the smae time which will greatly reduce the chances for congestion or interference. At least it’s worth trying.

6. Check the Router’s Firewall.

This doesn’t happen often, but sometimes the wireless IP camera is not able to connect to the WiFi because the firewall on the router doesn’t allow the communication to go through.

In this case, you need to access the router’s settings, adjust the firewall settings (such as excluding the IP address of the camera) and try again to see if the camera connects.

7. Make Sure the IP Address on the Camera is Correct.

In some cases, when you set up the wireless IP camera via a network cable and then disconnect the cable (in order to be wireless) the camera self assigns a different IP address that doesn’t match the one from your local network.

Let’s say, while the camera is wired you set the IP address to 192.168.1.100, and then once you unplug the cable the IP address changed to 192.168.0.100. In this scenario, you can’t see the camera. Double-check to make sure the camera is maintaining its IP address.

8. Update the Firmware on the Camera.

If you have tried everything and still, the camera keeps going offline or not connecting at all, then it’s always recommended to check the manufacturer’s (or seller’s) website if there’s a new firmware available.

Please understand that each IP camera is like a tiny computer that runs on certain algorithms that sometimes contain several bugs.

So, please keep your camera up to date. Not just your camera, but the router as well and the phone app you use to connect to the camera.

Please let me know if you have any questions!

#Zosi-SecurityMakeEasy

Know more via Zosi Website: https://www.zositech.com/