Applies to: Zosi 289 camera/ZR08JP NVR.(1.64 version)
If you try to connect the 289 camera to the wireless Zosi ZR08JP nvr , please refer to the below steps to match it ;
Please check if you can connect the camera to your router properly like the way as the picture showed;
1) Connect the wireless camera with power adapter(12V-1A). Make sure your 289 camera and zosi NVR system to the same wireless router through Lan cables, so the two devices will be in the same network.
2) Reset the camera by holding on the reset button for 5 seconds then you can hear crisp switch voice from the switcher inside the camera:reset successfully,waiting to connect .
3) Enter NVR's IPC Channel Config to click "Search" to find the camera.
After you find the camera, please click "Add all" to add the camera.
and it will add to the NVR successfully.
Then you can go back to view the video.
Besides,you can watch this video if you don't want to read too much text;
Please let us know if you have any further questions:
Support Email address: firstname.lastname@example.org
Our Facebook: https://www.facebook.com/ZosiTechnology/
Support center: email@example.com