Applied to :ZSWNVK-U83041;8CU-3023W4;

What if I have some prior cameras I want to connect to new NVR or new cameras connected to used NVR? How to do it?

1. Connect the camera and NVR with the network cable, and go to  the IPC channel config.
2. Search for the corresponding camera IP channel, select it, and click Reset;
3, After the reset is successful, search again, and then select the IP channel, double-click the left mouse button or click "All connection".
4, Wait for a few seconds and you can check the videos coming out from the cameras, unplug the network cable from the cameras, and wait for about 10 seconds, the video will be viewed again.

​Wireless connection is a success.

If you still have a problem on the connection,please check this video below and follow it to set your new system up.

If these can't help you, please provide these informations and email to our customer services.